Can ping system, but cannot log into webtool

Discuss installation issues/solutions for Engarde

Moderators: scrumpy, Dave, leihog

Can ping system, but cannot log into webtool

Postby kbron826 on Fri Nov 06, 2009 4:59 pm

I am a newbie who is attempting to install EnGarde for the first time. Downloaded the ISO, burned it, and went through the install process assigning static IP, gateway, and name server IP to the ethernet connection.

When the system reboots, and I select either "standard" or "secure", I can go to another PC on the network and ping the server, but I cannot log in with FireFox or IE to URL https://192.168.200.250/1023. I get the "cannot display the web page" error. I can open a command prompt and ping the server, just cannot bring up webtool.

any suggestions? I have read through the quick start guide, which just says you should ping it, and if you can, you should be able to bring up the webtool.

Thanks,
kbron826
 
Posts: 1
Joined: Fri Nov 06, 2009 11:20 am

Re: Can ping system, but cannot log into webtool

Postby taylorbanks on Mon Nov 09, 2009 1:14 pm

Check your URL above, you indicated that you tried "https://192.168.200.250/1023", but 1023 is a port number specification, so you should be accessing "https://192.168.200.250:1023" instead.
taylorbanks
 
Posts: 2
Joined: Fri Oct 16, 2009 9:52 am


Return to Installation

Who is online

Users browsing this forum: Majestic-12 [Bot] and 1 guest

cron